TMG-3308 Minus Green Filter

3/4 Minus Green correction suppressing the green spike from fluorescent, LED, and HMI sources for clean, natural skin tones and accurate colour reproduction.

  • Correction strength: 3/4 Minus Green
  • Green rejection band: ~480 – 594 nm
  • Peak suppression: ~41.2 % T near 549 nm
  • Blue passband: ~66.4 % T (400 – 490 nm)
  • Red passband: ~83.5 % T (600 – 700 nm)
  • Average transmittance: ~69.0 % T (visible range)
  • Construction: Ion-assisted hard-oxide; 5 – 450 mm shapes, 0.21 – 3.8 mm thick
  • Custom options: Intermediate correction strengths, combined Minus Green + CTO/CTB, rapid prototypes
Learn more

TMG-3308 Minus Green delivers Correction strength 3/4 Minus Green, Green rejection band ~480 – 594 nm, and Peak suppression ~41.2 % T near 549 nm.

The hard-oxide coating is built for repeated handling, heat, and cleaning.

Best suited for:

Three-quarter Minus Green correction provides strong green suppression for sources with significant but not extreme green excess

$0.00

Applicable Promotions

Add to Wishlist
Description

TMG-3308 delivers the most aggressive minus green action in the lineup, suppressing green to just 47.6 % average while red remains strong at 83.5 %. This deep minus green filter targets heavy fluorescent and discharge lamp sources where standard correction proves insufficient. Peak transmission of 91.4 % at 702 nm combined with substantial UV suppression at 49.3 % creates a compound effect - green elimination plus ultraviolet rejection - necessary for severely green-dominant light sources. Blue moderate at 67.5 % and the pronounced yellow dip at 53.0 % define TMG-3308 as the choice for extreme color correction scenarios where conventional filters underperform.

Key Advantages

  • Heavy-Duty Green Suppression - Reduces green to 47.6 % - a 35+ percentage-point cut from red - for severe overcorrection of old mercury vapor, high-output fluorescent, and problematic discharge lamp arrays
  • Yellow-Green Notch Elimination - Deep dip across the 540-580 nm yellow-green zone addresses the spectral heartland of fluorescent phosphor output, eliminating the characteristic green-yellow cast entirely
  • UV Rejection Bonus - Blocks approximately 50 % of ultraviolet at 380 nm, removing sensor noise and false color channels alongside green dominance in combined UV-green-heavy sources
  • Hard-Oxide Ion-Assisted Coating - Heavy-duty multilayer dichroic construction resists thermal shock and environmental stress from high-intensity discharge sources and aggressive field handling
  • Custom Format Options - Supplied in round, square, free-form blanks ranging 5 mm to 450 mm diameter, 0.21-3.8 mm thickness on Borofloat, soda-lime, Schott D263 T, or Corning Eagle XG substrates

Typical Applications

  • Industrial Facility Correction - Neutralize dominant green casts in warehouses, factories, and industrial spaces lit by high-output T8 fluorescent systems, metal halide, or sodium vapor arrays
  • Institutional Environments - Correct hospitals, schools, and office buildings where dense fluorescent ceiling grids create overwhelming green-yellow ambient light for video documentation
  • Outdoor Discharge Correction - Compensate for temporary or permanent mercury-vapor and high-pressure sodium street lighting on exterior event coverage, construction documentation, or urban cinematography
  • Machine Vision in Legacy Facilities - Achieve neutral white balance in factory quality control and inspection systems illuminated by old mercury or sodium discharge arrays resistant to replacement
  • Extreme-Condition Video Documentation - Support ENG, documentary, and emergency response videography in poorly lit institutional, industrial, or disaster environments where standard corrections fail

TMG-3308 enables rapid deployment in extreme correction scenarios. Full production support for custom specifications and high-volume orders.

FAQ

TMG-3308 FAQ

What is TMG-3308 and what is it used for?

TMG-3308 is a Strong Minus Green - Aggressive Correction. TMG-3308 delivers the most aggressive minus green action in the lineup, suppressing green to just 47.6 % average while red remains strong at 83.5 %. This deep minus green filter targets heavy fluorescent and discharge lamp sources where standard correction proves insufficient. Common uses include Industrial Facility Correction, Institutional Environments, Outdoor Discharge Correction, and Machine Vision in Legacy Facilities.

What are the key optical specs of TMG-3308?

Key published specs for TMG-3308 include Correction strength: 3/4 Minus Green; Green rejection band: ~480 – 594 nm; Peak suppression: ~41.2 % T near 549 nm; Blue passband: ~66.4 % T (400 – 490 nm); Red passband: ~83.5 % T (600 – 700 nm).

What applications is TMG-3308 best suited for?

TMG-3308 is commonly used for Industrial Facility Correction, Institutional Environments, Outdoor Discharge Correction, and Machine Vision in Legacy Facilities. Industrial Facility Correction - Neutralize dominant green casts in warehouses, factories, and industrial spaces lit by high-output T8 fluorescent systems, metal halide, or sodium vapor arrays.

Can TMG-3308 be customized for size, substrate, or coating requirements?

KUPO lists the construction for TMG-3308 as Ion-assisted hard-oxide; 5 – 450 mm shapes, 0.21 – 3.8 mm thick. Published custom options include Intermediate correction strengths, combined Minus Green + CTO/CTB, rapid prototypes. Custom Format Options - Supplied in round, square, free-form blanks ranging 5 mm to 450 mm diameter, 0.21-3.8 mm thickness on Borofloat, soda-lime, Schott D263 T, or Corning Eagle XG substrates.

What should I know about angle of incidence and durability for TMG-3308?

The hard-oxide coating is built for repeated handling, heat, and cleaning.

Download
Added to Cart
Shopping Cart Updated
Network error, please try again!