BMS-011 Beam Splitter

BMS-011 is a broadband, colour-neutral VIS beamsplitter giving a stable ~T77/R23 split across 400–730 nm (only ~76 % T by ~780 nm), producing two clean, true-colour paths with minimal balancing and helpful UV moderation below ~360 nm.

  • Passband: 400 – 730 nm (VIS), colour-neutral
  • VIS split ratio: ~77–79 % T / ~21–23 % R; ~76 % T near 780 nm
  • Spectral flatness: < ±1.5 % ripple across VIS
  • UV behaviour: Moderates < ~360 nm to reduce stray fluorescence
  • Construction: Hard dielectric stack on Borofloat®, Eagle XG, D263 T, or soda-lime
  • Custom sizes: 5 – 450 mm • 0.21 – 3.8 mm; rear-surface AR & slight wedge options
Learn more

The neutral, repeatable split of BMS-011 keeps exposure and colour closely matched between channels, simplifying calibration in taps, pick-offs, and dual-sensor rigs. The moderate T/R ratio is thermal-friendly for projectors, microscopes, and light engines, and the UV trim helps tame stray fluorescence.

Typical uses • Machine-vision taps • Optical viewfinders/director’s feeds • Dual-sensor capture • Projector/light-engine feedback • Metrology pick-offs • Microscopy/biomedical routing.

$88,888.00

Applicable Promotions

Add to Wishlist
Description

BMS-011 is a broadband, colour-neutral VIS beamsplitter that delivers a stable ~T77/R23 split across the eye-sensitive 400–730 nm band, drifting only slightly to ~76% T by ~780 nm. You get two clean, true-colour paths with minimal balancing—and helpful UV moderation below ~360 nm to tame stray fluorescence.

Key advantages

  • Neutral, repeatable ratio~77–79% T / ~21–23% R with <±1.5% ripple keeps exposure and colour closely matched between channels.

  • Flat spectral response – simplifies radiometric calibration and thresholding in machine vision.

  • UV trimmed, VIS preserved – attenuates deep-UV while maintaining natural white balance.

  • Thermal-friendly throughput – moderate T/R split reduces heat load in light engines and microscopes.

  • Rugged dielectric stack – abrasion and humidity resistant for stage, field, and lab use.

  • Made to fit – choose Borofloat®, Eagle XG, or D263 T (0.21–3.8 mm) for up to ~450 °C, or economical soda-lime for ≤150 °C. Custom-cut 5–450 mm; options include rear-surface AR and a slight wedge to suppress ghosts.

Typical applications

  • Machine vision taps – send a stable percentage to inspection/recording without tint.

  • Cameras & cinema – optical viewfinders, director’s feeds, dual-sensor capture.

  • Projectors & light engines – constant-ratio sampling for feedback or colour sensors.

  • Metrology & alignment – power pick-offs and interferometer splits.

  • Microscopy & biomedical – route illumination/detection paths while keeping colours true.

Need test chips tomorrow or thousands next quarter? BMS-011 beamsplitters are coated, diced, and shipped to your exact spec—fast.

Video
Download
Added to Cart
Shopping Cart Updated
Network error, please try again!